Service&support
TEL:
+84 0326 980 668
- Vietnam@china-jstar.com
LED inspection machine
1) The equipment is connected with SMT reflow soldering.
2) The equipment track automatically senses and operates the LED light board.
3) The test needle plate is automatically pressed down.
4) Automatically power on after contacting OK.
5) The host computer vision software analyzes the test result and gives an OK or NG signal.
6) OK products or NG products can pass through different flow directions.
7) The test speed is less than 0.5 seconds.
Item |
parameter |
Working area |
MAX 1200*350mm |
Positioning accuracy |
±0.2mm |
Repeat Accuracy |
±0.02mm |
Program capacity |
30000PCS |
DC voltage adjustment range |
0-100V /5A |
Visual camera speed |
0.5 s/pcs |
Product line replacement |
Adjust the time:≤50min |
Overall Dimension |
1500mm*750mm*1600mm |
System Weight |
150kg |
Power Supply |
220V/Single Phase/50Hz/60Hz/2A |
Power Consumption |
1000W |